Customization: | Available |
---|---|
After-sales Service: | 12moths |
Warranty: | 12moths |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Recommended large volume, water ring vacuum pump as a vacuum source pump is characterized by high service life, not easy to damage, combined with nearly ten years of subcontracting well point dehydration in the Middle East region, is the most optimized, the most practical pump
1 vacuum assisted, vacuum well point drag pump, is a professional application in construction engineering, foundation pit dewatering pump, different from submersible pump. On the dry, pristine surface, groundwater can be pumped up.
2. The underground water and air enter the Header pipr and enter the super-large volume stainless steel vacuum water tank (the super-large volume empty box will make the vacuum degree stable, and maintain a stable ultra-high vacuum, and maintain a stable water level, so that the pump drains stable and the flow rate reaches);
3. The vacuum pump uses a water ring vacuum pump, which is characterized by that even if it is pumped into groundwater, it will not cause damage to the pump (oil lubrication, the biggest defect of the rotary vane vacuum pump is that once it enters the water, it will lead to the oil "emulsification" and the final vacuum pump damage).
4. The power has diesel engine power, and motor power;
5. According to the caliber of the drainage pump, divided into 2 inches to 8 inches.
Application Of Vacuum Assist Pump:
Dewatering & Ground Control
Construction & Building Sector
Water Companies and Local Municipalities
Docks,Ports & Harbour
Industrial
Fire Fighting
Specification data Application Of Wellpoint Dewatering Pump:
Pump Model |
YP100 |
YP125 |
YP150 |
YP200 |
YP250 |
YP300 |
Standard Pump Body Material |
Cast Iron |
|||||
Standard Pump Impeller Material |
Stainless Steel |
|||||
Standard Pump Shaft Material |
2Cr13 |
|||||
Bearing Type |
Ball |
|||||
Maximum Lift in theory (m) |
9.5 |
|||||
Nominal Speed (rpm) |
1800 |
|||||
Inlet & Outlet Size (mm) |
100 |
125 |
150 |
200 |
250 |
300 |
Max. Dia Solids Handling Capability (mm) |
20 |
26 |
76 |
76 |
50 |
65 |
Max. Discharge Head (m) |
32 |
34 |
42 |
53 |
60 |
55 |
Max. Flow Rate (m3/h) |
150 |
200 |
360 |
540 |
1000 |
1800 |